 |
|
 |
DC Positive Stick, MIG and Sub-Arc Welding
Air Carbon Arc Gouging
Operates with Low DC Arc-Voltage
Multioperator Welding from a Single Power Source
Drastically Reduces Fuel/Energy Consumption
|
Instead of operating with high voltage AC current like a conventional electric welder, the MX350 uses low DC arc-voltage from a constant current electric or engine-driven welding machine, to produce up to 350 amps, DC positive, welding current at 100% duty cycle for stick welding or up to 40 volts of constant voltage power for MIG and flux-cored welding. The number of MX350 converters that can be run simultaneously from a single power-source depends on the power source’s output (kilowatts available), the welding processes used (kilowatts required), and the operating factor (how many units are welding at any given time). Use of this system results in drastically reduced fuel consumption since one power source used in conjunction with MX350 converters replaces several individual conventional power-sources.
Process Capabilities
When operating several MX350 modules from a single power source, any combination of DC positive welding processes can be performed including stick, MIG and flux-cored welding as well as air carbon arc gouging using up to 5/16" carbons
|
Specifications
Rated CC DC Output: 350 A at 34 V, 100% duty cycle
Output Range: 30 - 350 A, 15 - 40 V
Input DC Volts: 60 - 80 VDC, 50 -113 V peak range
Input Amps at Rated Output: 165 A DC
Minimum Input Voltage Requirements: 60 VDC, CC
Weight: 59 lb (26.8 kg)
Dimensions: H: 11.6" (295 mm) W: 10" (254 mm)
D: 21.5" (546 mm)
Available Accessories
RC1 remote control, LN25 wirefeeder, 12VS wirefeeder
|
|
|
|
|
|
|
Download Product Information
|
|