View and Submit Quote

New Product Added to Quote Request

Model
Close

Rental Equipment

E300 3+2 Multi-Operator Paks

E300 3+2 Multi-Operator Paks

Top Features

  • 2,000 Watts, 115 VAC Auxiliary Power per Module
  • Available in 4Pak and 6Pak Configurations
  • Built to Red-D-Arc Extreme-Duty Specifications
  • Arc Force, Hot Start, Continuous Output Control
  • Full Remote Control Capabilities
  • Processes: Stick (SMAW), MIG (GMAW), Multiprocess, Multioperator, Air Carbon Arc Cutting, Flux-Cored (FCAW)

The highly efficient design of the E300 3+2 permits the 4Pak version to be operated with a 60 amp service and the 6Pak version from a 100 amp service with either 460V or 575V 3 phase power. With up to 350 amps of DC welding current, full welding output controls, 115 VAC auxiliary power for tools, compact size, and multi-process capability, these Paks are the ideal choice for multiple operator use.


   E300 3+2 Spec Sheet
English PDF2   E300 3+2 Service Manual

Product Details

Specifications

Individual Module Specifications
DC Amperage Range: 20 A at 20 V - 350 A at 34 V
Rated CC Output: 350 A at 34 VDC, 20% duty cycle
250 A at 30 VDC, 60% duty cycle
DC Voltage Range: 15 - 45 V
Maximum OCV: 70
4Pak Specifications
Weight: 1,402 lb (635.9 kg)
Dimensions: H: 54.5" (1384 mm) W: 44.5" (1130 mm) D: 32" (813 mm)
6Pak Specifications
Weight: 2,168 lb (983.4 kg)
Dimensions: H: 76.5" (1943 mm) W: 44.5" (1130 mm) D: 32" (813 mm)

Processes

Stick (SMAW)
MIG (GMAW)
Multiprocess
Multioperator
Air Carbon Arc Cutting
Flux-Cored (FCAW)

Additional Features

Outstanding arc characteristics on both constant current and constant voltage processes in a rugged, compact design. Includes MS-style connections for 115V wire feeders and 3-pin remote controls.

Features

  • Extreme-Duty™ stainless steel construction for operation in harsh environments
  • Outstanding arc characteristics on both constant current and constant voltage processes
  • Windings and rectifiers protected against moisture and corrosive environments
  • Single range full output current/voltage potentiometer for easy operation
  • Solid state circuitry provides extra-long life for repetitive welding applications
  • Arc force on/off switch
  • Arc force control (CC mode only) to adjust short circuit current for a soft arc or a forceful driving arc
  • Hot start for easier starting of difficult-to-start electrodes
  • Fan cooled with electronic and thermostatic protection from current overload and excessive temperatures
  • Thermal fan circuit breaker
  • 3 pin MS style cable connection for CC stick, potentiometer type remote controls
  • 14 pin MS style cable connection for constant speed wire feeder controls
  • 30 amp input power on/off circuit breaker
  • 120 volt 10 amp wire feeder circuit breaker
  • 120 volt 10 amp thermal fan circuit breaker
  • 120 volt 20 amp auxiliary duplex receptacle with circuit breaker
  • 120 volt GFI breaker for 115 volt auxiliary power and wire feeder circuit
  • CSA approved
  • Rugged tubular Pak-Lok-Frame™ enclosure for increased protection

All Product Resources

Options, Accessories and Related Equipment

Options
Wire feeder
Remote control
115 VAC constant speed wire feeders and spool guns
4Pak and 6Pak multi-operator systems

Related Equipment
LN25 wire feeder
RC1 remote control

E300 3+2 Multi-Operator Paks

Quantity:
Interest:
RadDatePicker
RadDatePicker
Open the calendar popup.
RadDatePicker
RadDatePicker
Open the calendar popup.
Feedback

1-866-RED-D-ARC(1-866-733-3272)

Credit Card Icons
Airgas

Airgas, an Air Liquide company, is a leading U.S. supplier of industrial, medical and specialty gases, as well as hardgoods and related products; one of the largest U.S. suppliers of safety products; and a leading supplier of ammonia products and process chemicals.