Top Features
- Cut, Bevel and Counterbore Pipe From 2" to 48" O.D.
- Low Clearance Design - Minimal Space for Setup and Operation
- Splits Open to Mount Around the OD of Inline Pipe
- Fully Enclosed Bearings and Drive Gears for Safety and Durability
The Low Clearance Split Frame (LCSF) machines can be split in half or broken open, then bolted back together. This allows them to open and mount around the O.D. of inline piping, or slipped over open ended pipe. The LCSF has been engineered to apply precise, consistent square cuts and bevels on pipe, tube and casing. Using a split frame is a safe, clean operation that neither affects the metallurgical qualities of the pipe nor places airborne contaminants into the environment. 14 models are available to cut, bevel and counterbore pipe of various wall thicknesses and alloys.
LCSF Models
Model | Pipe Size (in) | Pipe Size (DN) |
LCSF 204/3 | 2 - 4 in | DN 50-100 |
LCSF 206/3 | 2 - 6 in | DN 50-150 |
LCSF 408/3 | 4 - 8 in | DN 100-200 |
LCSF 610/3 | 6 - 10 in | DN 150-250 |
LCSF 612/3 | 6 - 12 in | DN 150-300 |
LCSF 814/3 | 8 - 14 in | DN 200-350 |
LCSF 1016/3 | 10 - 16 in | DN 250-400 |
LCSF 1420/3 | 14 - 20 in | DN 350-500 |
LCSF 1824/3 | 18 - 24 in | DN 450-600 |
LCSF 2228/3 | 22 - 28 in | DN 550-700 |
LCSF 2632/3 | 26 - 32 in | DN 650-800 |
LCSF3036/3 | 30 - 36 in | DN 750-900 |
LCSF 3642/3 | 36 - 42 in | DN 900-1050 |
LCSF 4248/3 | 42 - 48 in | DN 1050-1200 |