EXtreme360 - 350 AMP Multi-Process Inverter Welder

Specifications

Additional Features

Features
Auto-Line Power Management Technology allows for operation with any type of primary power from 208 to 575 VAC, single- or three-phase, 50 or 60 hertz, with no manual linking required - ideal for dirty or unreliable input power. 4Pak and 8Pak Multioperator units include DP120 Panels and operate with 460/575/3/60 input power. Wind Tunnel Technology protects electrical components and PC boards from contamination. Fan-On-Demand cooling system operates only when needed, reducing noise, energy use and amount of contaminents pulled through the machine. Lift-Arc allows TIG starting without the use of high-frequency. Starts the arc without contaminating the weld with tungsten. Adaptive Hot Start increases the output amperage at the start of the weld if necessary, eliminating electrode sticking. Inverter arc control provides greater puddle control for superior electrode performance. Line voltage compensation keeps power constant even if power input varies by ± 10% on 575 volt power and +37%/-59% on 460 volt power. Process selector switch reduces the number of control setup combinations without reducing any features. Large, dual digital meters are easy to view and presettable to ease setting weld output. Pulsed MIG capabilities with optional Optima control reduces spatter and distortion, allows better out-of-position puddle control, and provides potential reduction of fume particle emission. Lightweight, aerospace-grade aluminum case offers protection with the benefit of reduced weight. Optional 114 VAC auxiliary power is available.

• CC/CV welding processes with full remote-control capability
• Auto Remote Sense enables unit to automatically use remote control if connected to remote control receptacle
• Potentiometer-type remote control
• Exceptional electrical efficiency (87.24% efficiency at 400A)
• Power factor of .95 enables smaller fuses/breakers and primary wiring
• Selectable Low-OCV Stick mode reduces open circuit voltage to nearly 15 volts when welding power source is not in use
• Extreme-Duty environmental protection with ultra-tough, poly carbonate-blended control panel cover
• Tweco style output terminals
• Wind Tunnel Technology protects electrical components and PC boards from contamination
• Line Voltage Compensation keeps welding output constant with power variations of +/- 10%
• CSA certified to both U.S. and Canadian Standards for welding equipment

All Product Resources

English EX360 Spec Sheet EX360 Spec Sheet Airgas EX360 Operator Manual EX360 Service Manual

Options, Accessories and Related Equipment

Options
Remote control
Wiredfeeder
115 VAC auxiliary power
Gas solenoid for TIG welding
Water cooler
Pulse MIG control
Pulse TIG control
Constant speed wirefeeders and spool guns

Related Equipment
Coolmate water cooler
Optima pulse MIG control
Intellitig-4 pulse TIG control
LN25 wirefeeder
RC1 remote control

Used Multi-Process Welders