Picture shown is representative only

Used DX450 Diesel Engine Welder

One of the most compact and quiet 450 Amp engine-driven welders available on the market. Chopper Technology delivers superior welding-arc performance in all welding modes. VRD (Voltage Reduction Device) reduces the OCV in CC Stick mode for added safety.

Manufacturer Part Numbers:	K2712-1, K3211-1, K3211-2, K3211-3
Processes:	Stick (SMAW), TIG (GTAW), MIG (GMAW), Flux-Cored (FCAW), Air Carbon Arc Cutting and Gouging (CAC-A)
Open Circuit Voltage:	60 Max OCV
AC Generator Auxiliary Power:	19,000 Watt Peak/17,000 Watt Continuous, 60 Hz, 240 V, 3 phase 12,000 Watt Peak/11,000 Watt Continuous, 60 Hz, 120/240 V, 1 phase
Rated Output:	400 A at 36 VDC 100% duty cycle 450 A at 32 VDC 100% duty cycle
Output Range:	30 - 500 A DC 40 - 300 A DC Pipe 20 - 250 A Touch-Start TIG 14 - 36 V DC CV 90 - 450 A Gouge
Fuel Capacity:	20 gallons (75 L)
Fuel Consumption:	0.42 GPH (1.58 LPH) low idle - no load (1400 R.P.M) 0.60 GPH (2.28 LPH) high idle - no load (1800 R.P.M.)
Weight:	1,245 lb (565 kg)
Dimensions:	H:35.9" W:25.3" L:60" (913 mm x 643 mm x 1524 mm)
Resources:	Spec Sheet \| Operator Manual

Heading

Welding Processes	Stick (SMAW)\|TIG (GTAW)\|MIG (GMAW)\|Flux-Cored (FCAW)\|Air Carbon Arc Cutting and Gouging (CAC-A)
Max Output	400-499
Weld Output	CC / CV
Current Type	DC
Compressed Air	No
Customer favorites	No
Description	Used DX450 Diesel Engine Welder
Item number	UMDX450
New	No
Product name	Used DX450 Diesel Engine Welder
Staff favorites	No